American Machining,Inc. Mixers Drives, Flip Mix

The Shaft
can enter
through a
2” or 3”
opening (Bung)

Allows mixing
in a 55 gallon
drum.

American Machining,Inc. Mixers Drives, Flip Mix, Blades

Shaft
can be equipped with multiple blades when required.

Specially designed FlipMix™
blades automatically open inside
the tote.

American Machining,Inc. Mixers Drives, Flip Mix, Stand and Wash Tank

Stand/Wash Tank for
FlipMix™ Storage stand with built-in wash tank for on-site cleaning.
(Stand shown for single
blade other models available for multi blades.)

Stand/
Wash
Tank for
FlipMix™ Storage
stand with
built-in wash
tank for on-site cleaning.
(Stand shown
for single
blade other
models
available for
multi blades.)

IBC Resource, AMI American Machining Inc, Cygnet

Products

Services
Equipment Rental
Cleaning Services

IBC Federal Regulations
Client List
Resource Links
Procedures
Cost-Saving Tips
Site map
Search

Certified wbenc Women's Business Enterprise

810-629-0091 Office
810-629-0046 Fax
877-629-0091 Toll Free

Site Designed
& Hosted by ACE

American Machining,Inc. Mixers Drives, Flip Mix

FlipMix™ does what other mixers can’t do. It’s designed to fit through a 2“ opening
and operate 1” off the bottom of the tote, which is much lower than a standard
hydrofoil. A Standard hydrofoil must be at least one blade diameter off the bottom of the tank and they lose their effectiveness when product begins to fall within one blade diameter above the hydrofoil. In a 42”x 48” tote, there could be 120 gallons or more not getting mixed!

• American Machining Inc. is the leader of the portable
tank (IBC), mixing industry, with the FlipMix™ being
our latest innovation.
• Specially designed FlipMix™ blades fold so that
they will fit through an opening as small as a 2”
Bung and automatically open once inside the tote.
• All wetted components are standard
304 Stainless Steel (316 SS optional).
• Specially designed stand allows cleaning of
blades during storage (optional; see below).
• So light-weight any operator can install it.
• Shaft can be equipped with multiple blades.
• Competitively priced and ready to ship.
• Supplied with a special air flow control
valve for easy and precise RPM control.
• Blade diameters from 6” to 13”.
• Pneumatic motor 1hp – 5hp.

American Machining,Inc. Mixers Drives, Flip Mix II

American Machining,Inc. Mixers Drives, Flip Mix Drum Mount

FlipMix II™
Now Mix In Poly’s Like Never Before

• Exceptionally designed FlipMix II™ blades open 6” from the bottom without touching the Poly Tote.
• Specially designed Drop & Lock mount allows fast & easy installation. The uniquely machined mount will protect the tank opening from distortion.
• Superbly designed stand allows cleaning of blades during storage (optional; see below).
• Uses a needle air valve for slow ramp up and precision speed control.
• FlipMix II™ has blade sizes from 3” to 16”.
• All wetted components are standard
304 Stainless Steel (316 SS optional).
• Light weight for quick installation.
• Pneumatic motor 1hp – 5hp.
• Ergonomically designed.
• Economically priced.